Add Leading Zero To A Cell Based On Length Of Cell Contents. |
Add Leading Zero To A Cell Based On Length Of Cell Contents. - Excel |
|
Hi All,
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
I need to create a IF statement where it will count the character length and if not 6 then add leading zeros to field to make a fixed 6 character length .. so if field is 489 then the if statment would make it 000489
I have imported a DBF file into Excel and have a column of dates that are missing the leading zero on single didgit months. When I try to us the custom format of mm/dd/yyyy it doesn't work (interestingly, after I select that format if I click on an individual cell it changes to the right format).
Does anyone know a better way to do this?
Thanks in advance!
Does anyone know a better way to do this?
Thanks in advance!
Hi all.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select
Range("A1:N18").Select
ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I was wondering if anyone could help me out please?!?!
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
-Aric
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
-Aric
I have a list of 10-digit numbers, but I want to apply a formula/function or
format the cells so that only the first 6 digits show up. Is this possible?
format the cells so that only the first 6 digits show up. Is this possible?
In excel, I tried to convert numbers to number format, using
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.
James
James
I know this question has been asked a bajillion times, so I apologize for the redundancy.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I have looked over the forums for information on how to do this, and can not find anything. I have used conditional formatting to identify duplicates in my spreadsheet. I have a unique user ID, which combines the first and last name fields into one. However, in 10,000 there are a number of John Smiths, Joe Adams, etc. With smaller lists, we search manually, and then add a 1, 2, 3, etc to each duplicate to create a unique value for the User ID.
My question is:
Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?
So that you will have this:
JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4
I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.
Thank you in advance for your help!!
My question is:
Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?
So that you will have this:
JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4
I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.
Thank you in advance for your help!!
From limited experience I know that excel calculates dates via serial numbers.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.
The question:
How can you prevent a cell's contents from overflowing into the next cell?
Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.
Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.
The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.
Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.
Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.
Tested in Excel 2002
The question:
How can you prevent a cell's contents from overflowing into the next cell?
Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.
Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.
The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.
Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.
Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.
Tested in Excel 2002
Hi Everyone,
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I am creating a data sheet to be completed by other users. I would like to
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.
UPPER function cannot make cell look at itself and perform the function
Excel 2003
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.
UPPER function cannot make cell look at itself and perform the function
Excel 2003
Hello,
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.
Hi all -
Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.
Cell Value = "birds"
Example -- I need to filter every row so that I see every row that CONTAINS "birds" in the character-string, not just the row that = "birds".
a) is this possible?
If not, I'd like to know also so I can stop attempting to guess (-;
Thanks!!!
Matt
Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.
Cell Value = "birds"
Example -- I need to filter every row so that I see every row that CONTAINS "birds" in the character-string, not just the row that = "birds".
a) is this possible?
If not, I'd like to know also so I can stop attempting to guess (-;
Thanks!!!
Matt
Is it possible to have numbers added to the same cell and have excel continue
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?
Hey guys,
I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -
Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub
The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!
I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -
Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub
The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!
I am trying to correct a formula for a productivity worksheet in excel. The idea is that we would have the ability to input the number of hours worked each day and the number of direct hours (working with clients) per day. Then take the daily percentages and add them then devide them to determine the final productivity percentage for the week. Additionally not everyone works a full week so I would need it to only divide the percentages of the days that were completed. Any suggestions? or does anybody know a formula that would accomplish this already? I am good with basic excel and was able to identify a flaw in the current productivity sheet.
Here's my formula... =SUM(S7)-T5
If that number is less than -100, I want it to show as blank.
Any help?
Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.
Thanks.
If that number is less than -100, I want it to show as blank.
Any help?
Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.
Thanks.
Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!
I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.
I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?
______________________
Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.
If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...
Any help would be much appreciated. This is driving me nuts!
I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.
I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?
______________________
Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.
If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...
Any help would be much appreciated. This is driving me nuts!