File Locked For Editing , Can I Kick The Other User Out If Its My File?

I have an excel 2007 file sitting in a shared network folder. I only want one user to be able to make changes at a time (any other users would get a read-only). For some reason it currently does not do this, and I have multiple users with the same doc open. I'm concerned that changes will get over-written when 2 people are saving their changes. Can anyone help me with the settings for this.

I need help desparately. Last night I spent several hours working on an
Excel 2002 spreadsheet and it has disappeared.

I saved it routinely as I was making many changes updates etc. I opened
original file --stuff.xls --- made changes and saved it as again as
stuff.xls. I have done this several times before.

Today, when I go to open stuff.xls, it is nowhere to be found!!!!! I have
done a search, for any file modified since Thurs and nothing has appeared. I
have checked the recycle bin, this did not go into auto recover nothing of
the like. I am just traumatized, because I have NEVER had anything like this
happen before.

I even thought perhaps I didn't save it as often as I thought, (I know that
I did) but I remembered that I saved it at least once and I can't even find
an Excel file that has been modified since Thurs!!!

Does anyone have any idea what could have happened to this file?? BTW, I
have prayed, rebooted, run spybot, called witch doctor, all with no success.

I have never had a file to just disappear with no trace. Any help would be
greatly appreciated.

Thanks in advance---

Thought I'd start this topic since there seem to be a number of topics where the answer seems to be to use one of the above rather than other. Thought I'd kick off with my 2 cents' worth.

I have a userform with frames containing textboxes. The user enters a currency value and once they leave the control, then a protected textbox next to it shows the corresponding value in SEK. I started off using the exit event but ran into 2 problems.

If you tabbed out of the last textbox in the frame, the exit event never kicked in (this is documented in other topics but took some time to find). This resulted in me using the exit event for all except the last textbox in the frame that used afterupdate instead I then discovered that the exit events didn't kick in if, instead of tabbing out of the field, I deliberately placed focus in a control elsewhere on the form. Changing the event from exit to afterupdate corrected this. My question then is ... could you guys document in this topic when you would/must use the exit rather than the afterupdate event (or vice-versa).

Thanks

I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.

Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.

I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).

What modifications do I make to this to get this to work per above requirements?

Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub

Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.

Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.

Any help anyone could provide would be WONDERFUL. Thanks!

Hello,

I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.

Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.

I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).

I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!

Thanks,
Jason

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

Hi all

I've code some VBA code which produces an output file from a template.
Now, if I want to run the output more than once, I get an message asking if I want to overwrite the existing file (which I always do).

I've tried turning off displayalerts but it's not working.
Is there any way of turning this message off?

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo

I cannot edit an excel spreadsheet that I had made. When I open up the file I can view everything but change nothing. The file is not saved as read-only. What can I do?

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

If I want to activate a workbook, I would do this:

Code:

Windows("File.xls").Activate

But what if the File.xls was a variable named File?

I have tried this:

Code:

Windows(File).Activate

Without success. Please advise.

I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.

I'm new to macros and would appreciate any help this board can offer. Thanks...