Locking And Unlocking Cells Based On Value In Another Cell |
Locking And Unlocking Cells Based On Value In Another Cell - Excel |
|
Afternoon all,
This is what I want to happen but I have no idea how to do it.
If C14 = "IV" THEN E14 = Locked AND F14 = Unlocked
If C14 = "RV" THEN E14 = Unlocked AND F14 = Locked
If C14 = "AJ" THEN E14 AND F14 = Unlocked
Another thing I would like to make possible is for this to work throughout cells C14:C450, E14:E450 and F14:F450
Can anyone help me out on this?
This is what I want to happen but I have no idea how to do it.
If C14 = "IV" THEN E14 = Locked AND F14 = Unlocked
If C14 = "RV" THEN E14 = Unlocked AND F14 = Locked
If C14 = "AJ" THEN E14 AND F14 = Unlocked
Another thing I would like to make possible is for this to work throughout cells C14:C450, E14:E450 and F14:F450
Can anyone help me out on this?
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Corporate edict.
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!
I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.
I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?
______________________
Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.
If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...
Any help would be much appreciated. This is driving me nuts!
I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.
I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?
______________________
Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.
If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...
Any help would be much appreciated. This is driving me nuts!
file locked for editing , can I kick the other user out if its my file?
I have made an excel file where other people have to go in and update it. This process takes 2 secs but some people forget and stay in it over lunch etc causing a great annoyance.
Is there anyway I can "kick" them out my file? Im not concerned if they lose any data they've entered as I'm sure this will help them get the message to get out the file quicker..
Its really doing my head in... pls help
I have made an excel file where other people have to go in and update it. This process takes 2 secs but some people forget and stay in it over lunch etc causing a great annoyance.
Is there anyway I can "kick" them out my file? Im not concerned if they lose any data they've entered as I'm sure this will help them get the message to get out the file quicker..
Its really doing my head in... pls help
Hello,
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
but that didn't work
Thanks
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks
Afternoon all,
I'm hoping someone can help me.
I need to be able to clear the contents of cells in column C, D, E, H if the value of column Q equals HELLO for arguments sake.
Clearing the contents of an entire row is not a problem, however when it comes to resizing rows I seem to come unstuck.
Related thread: http://www.mrexcel.com/forum/showthread.php?t=476993
Any help would be appreciated.
I'm hoping someone can help me.
I need to be able to clear the contents of cells in column C, D, E, H if the value of column Q equals HELLO for arguments sake.
Clearing the contents of an entire row is not a problem, however when it comes to resizing rows I seem to come unstuck.
Related thread: http://www.mrexcel.com/forum/showthread.php?t=476993
Any help would be appreciated.
is it possible to put two formulasinto one cell?
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
I have a couple of worksheets that have goal seek already performed on 20 target cells (for each worksheet). I did this manually, without a macro (since I'm absolutely horrible at all of this).
Now from what I can tell, I need a code to add to the worksheet module in order to make sure that the goal seek updates itself whenever I change a value in the formula of the target cell.
what IS that code?! I can't understand the codes some people have put up, so I have no idea what to do.
Target Cell: M21:M42
Changing Cells: N21: N42
Now from what I can tell, I need a code to add to the worksheet module in order to make sure that the goal seek updates itself whenever I change a value in the formula of the target cell.
what IS that code?! I can't understand the codes some people have put up, so I have no idea what to do.
Target Cell: M21:M42
Changing Cells: N21: N42
Hello
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
Hi all,
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I have a weird one here. I cannot scroll up or down on a particular worksheet. All the other sheets in the workbook operate successfully, but this one appears to be locked. I have tried both the right hand scroll bar and the mouse. The indicator on the scroll bar moves but the page is "stuck". I have copied it out to a new workbook and this is consistent behavior here too.
Cheers,
Doug
Cheers,
Doug
Is there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
Greetings all,
How do I link cells so that I can make data entries into either cell? I believe this is called 2 way cell linking.
In short, I want to have a cell on one tab linked to a cell on another tab and be able to change the value of both cells by entering data either tab.
How do I link cells so that I can make data entries into either cell? I believe this is called 2 way cell linking.
In short, I want to have a cell on one tab linked to a cell on another tab and be able to change the value of both cells by entering data either tab.
when I type a number or letter into a cell and then press enter the cursor
jumps way down the page to what appears to be a random cell. The one i
originaly typed in remains blank. spreadsheet was previously ok this has
just started to happen.
help please
thanks
jumps way down the page to what appears to be a random cell. The one i
originaly typed in remains blank. spreadsheet was previously ok this has
just started to happen.
help please
thanks
I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
Hi,
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
I have a set of data about with approx 7500 cells all contained in one column. The data has a series of peaks that happen, and I need to identify each peak value and place it in a cell. The peak does not occur at regular intervals but they are somewhat regular, as in within 130-230 data points. So, if one could find the first peak in the first 200 cells, identify it and store it somewhere, then look in the next 200, store it, etc. I don't know how to do that in excel. Please help
Thanks
Jon
Thanks
Jon
Hi,
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Hi
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?
Thanks in advance.
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?
Thanks in advance.