Multiple Validation In A Single Cell

Hi,
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:

With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With

I receive a confirmation message box with this message:

"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]

I wish to delete all sheets without receiving any message.

Is it possible?

Many thanks in advance for your kind support.

Regards,

Giovanni

I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.

How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..

Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.


James

Hi,

Try this...

There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.

Can we implement this formula?

IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}

Thanks in advance...

Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy

I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.

I have an image or picture within a worksheet.

I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.

Is this possible in Microsoft Exec 2000

Arcangelo from Italy asks: How can I write an Excel VBA macro to save the current Excel file with a filename derived from cell A1?
This macro is amazingly straight-forward:

Public Sub SaveAsA1()
ThisFile = Range("A1").Value
ActiveWorkbook.SaveAs Filename:=ThisFile
End Sub
I'm totally lost on this "amazingly straight-forward" macro!!!! Could someone help if I tell you the SAVE location? It's T:\COMMISSIONING\IJT\TIMELOG project\Staff#1. I'm just not certain what value I'm replacing in the Macro above.

Any help appreciated..

Hi...hoping someone can help with a grouping problem.

I have 50 rows that I want to group. Rows 1-10 should be a group, 11-20 are a group, etc. The problem is, when I group 1-10 and then group 11-20 seperately, excel automatically makes 1-20 a single group and removes the individual groups that I wanted.

Any ideas?

Thanks in advance!

I found this solution for "drop down list with hyperlink" but it did not work.

Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:

=HYPERLINK(A1, "Goto Link")

The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.

"Cannot open the specified file"

Any thoughts?

Bob

I have imported a DBF file into Excel and have a column of dates that are missing the leading zero on single didgit months. When I try to us the custom format of mm/dd/yyyy it doesn't work (interestingly, after I select that format if I click on an individual cell it changes to the right format).

Does anyone know a better way to do this?

Thanks in advance!

Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:

We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.

So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.

The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.

I ran a search on the forums and found something similar, but not quite what I was looking for.

Any help?

Hi All,

I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :

Code:

Private Sub CommandButton2_Click()
 'REMOVE SELECTION
 
  Dim I As Long
 
    With ListBox1
      For I = .ListCount - 1 To 0 Step -1
       If .Selected(I) Then
           .RemoveItem I
           Sheets("URL List").Rows(I + 2).EntireRow.Delete
           
        End If
      Next I
    
End With

End Sub

Thanks a lot for your help in advance.

I am a very advanced Excel user so this is a new one for me.

When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.

In addition:

Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)

And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.

Help!

Hello everybody,

We all know we can change the source of a link of the workbook by clicking Edit>Links>Source>change source but that will change the source of all workbook formulas which are linked to a certain file, what about if i need to change the source of a single sheet? is this possible?

I appreciate your support.Thank you !